Why does the power keep tripping?
A tripping breaker isn’t the problem. It’s the safety device telling you there is one. When people in Riyadh call an electrician about recurring trips, the cause is almost always one of these.
An overloaded circuit
In summer, two or three ACs can end up on the same circuit along with a water heater or washing machine. The current goes over what the breaker is rated for, and it trips. This is common in homes where extra AC units were added after the original wiring, without the loads ever being redistributed.
A short circuit
A short happens when the live conductor touches neutral or earth, through damaged insulation, a nail driven into a cable while hanging something, or water reaching a socket. The giveaway is a trip the moment you switch the circuit on, sometimes with a bang or a scorch mark.
Loose, overheating connections
Heat and time loosen terminals. A loose terminal gets hot, blackens the socket and gives off a plastic smell. This is one of the more dangerous faults because it may never trip the breaker at all.
Earth leakage
If your earth-leakage breaker keeps tripping, current is probably escaping to earth from a water heater, a washing machine or a damp outdoor socket. Don’t ignore it. That device is there to protect you from a shock.
How our electrician approaches a fault
- Listens first: when does it trip, with which appliance, any smell or noise? These details save a lot of time.
- Checks the panel: breaker ratings, terminal temperature and how circuits are laid out.
- Tests and isolates: disconnects loads and tests each circuit until the exact source is found.
- Quotes before fixing: explains what was found and what the repair costs.
- Repairs and tests: replaces damaged parts, tightens connections and tests everything with you.
Tips to cut down summer faults
- Avoid starting every AC, the oven and the water heater at the same moment, especially in older homes.
- Don’t daisy-chain extension leads, particularly for window ACs, heaters and kettles.
- Report any socket that runs warm or changes colour early.
- Fit proper covers on outdoor sockets against dust and rain.
Safety comes first
Work inside the panel or behind sockets is a job for a licensed electrician. If you see sparks or notice heat or a smell, switch off the breaker, step away and message us on WhatsApp. Please don’t fit a larger breaker or join wires yourself: a bigger breaker simply lets the cable overheat instead of tripping.



